Sigenergy EV DC Charging Module

The module starts at 12.5 kW. Eligible hardware can reach up to 25 kW with a separate app licence.

The optional upgrade costs $1,100 AUD including GST, purchased after sale through mySigen → Service → Mall. Choose SigenStor EVDC 25 kW Fast Charging License. It is excluded from the PSW installed-module guide and is not added to your PSW Plan total. Check the module rating plate: older non-upgradeable versions cannot use this licence. Price confirmed 21 October 2026; the app price at purchase applies.

It needs a compatible Sigen Energy Controller and a vehicle with CCS2 DC charging.

We check the controller, storage, firmware, available power and parking position together. Actual speed is limited by the power available from solar, batteries and grid, and by the vehicle’s DC acceptance. Selecting 25 kW does not guarantee that rate. Vehicle-to-home and black start require a separately confirmed vehicle, system and supported software arrangement; do not assume them from a CCS2 socket alone.

3 years of manufacturer cover for the DC charging module.

Sigenergy's AU/NZ SigenStor warranty dated 26 May 2026 gives the EV DC module three years, separately from the battery and controller. Cover starts at installation, activation and registration, or 180 days after factory shipment if not commissioned earlier. A charging-power software upgrade is not a warranty extension. PSW’s separate installation and service warranty is 5 years. For equipment supplied and installed by PSW, from installation completion, only where your signed installation agreement includes this commitment. Your written quote confirms whether it does. Existing longer promises and Australian Consumer Law rights remain unchanged. Manufacturer warranties apply separately on their own terms. Keep the rating plate, manufacturer warranty, licence record and handover documents; PSW Life Support is your local contact when we supplied and installed the system.

SigenStor EVDC family. The family datasheet includes earlier cable and hardware versions; read it with the revised upgrade application note. Your quote confirms the upgradeable module and cable supplied.

Charging type / connector

DC charging · CCS2

Factory charging limit

12.5 kW

Optional software limit

Up to 25 kW · eligible hardware and separate after-sale licence

Vehicle cable in this guide

7.5 m · 10 m version on quote

Output voltage range

150–1,000 V

Dimensions (W × H × D)

700 × 270 × 260 mm

Weight

40 kg

Enclosure / cooling

IP66 · smart air cooling

Operating temperature

−30 to +60 °C

Monitoring

mySigen · LED indication

Manufacturer product warranty

3 years · AU/NZ terms apply

The installed-module guide covers the 12.5 kW module, 7.5 m CCS2 cable and base installation into a compatible SigenStor system. The controller, battery, Gateway and optional app licence are separate.

The vehicle cable length is separate from the electrical site-wiring allowance. Your quote records the mounting, cable route, system checks, commissioning and handover, with switchboard changes, longer routes and other extra work itemised.

Where your Plan already includes a recognised SigenStor configuration, its whole-system guide counts the DC request once. The module guide is not added again to that system guide.

AUD, including GST, the 12.5 kW module, 7.5 m CCS2 charging cable and base installation into a compatible SigenStor system. Additional site work, system changes and the optional 25 kW software licence are excluded. We check your existing equipment, vehicle and installation position; your written quote confirms the final scope and price.