GoodWe HCA EV Charger

7 kW on single phase; 11 or 22 kW on three phase.

Your car’s onboard AC charger and the available electrical supply limit the actual charging rate. The original HCA has a 6 m Type 2 charging cable. We check the car, supply and parking position before confirming the model.

Solar-led charging needs a compatible control and metering arrangement.

We check the inverter, meter, communications and charging settings together. Adding a charger does not make an existing inverter battery-ready: if storage is planned, its connection and controls are a separate design check. GoodWe uses SEMS for monitoring and scheduling.

Manufacturer cover: 2 years standard; a paid extension is separate.

GoodWe's AU/NZ HCA warranty Rev1.2 gives the original HCA models two years, from first installation or six months after production, whichever is earlier. A separately purchased extension can make five years in total; its extra three years cover hardware only, with purchase deadlines and conditions. It is not included automatically. PSW’s separate installation and service warranty is 5 years. For equipment supplied and installed by PSW, from installation completion, only where your signed installation agreement includes this commitment. Your written quote confirms whether it does. Existing longer promises and Australian Consumer Law rights remain unchanged. Manufacturer warranties apply separately on their own terms. Keep the model, serial number and handover documents; PSW Life Support is your local contact when we supplied and installed your charger.

Original HCA family. Your quote confirms the supplied model and availability; HCA G2 is a separate range.

Charging connection

6 m cable · IEC Type 2

Dimensions (W × H × D)

208 × 450 × 150 mm

Enclosure / charging plug

IP66 / IP55

Location / mounting

Indoor or outdoor · wall or post (post required)

Communications

Bluetooth and Wi-Fi

Monitoring

SEMS · app and LED interface

Operating temperature

−30 to +55 °C

Standby power / noise

Less than 6 W / less than 20 dB

Residual-current protection

Type A + 6 mA DC fault-current protection

Manufacturer product warranty

2 years standard

For the full protection, operating limits and installation requirements, read the Australian datasheet and user manual.

Base installation is included in the reference installed guide.

The written quote records the charger and mounting, circuit protection, cable route and allowance, commissioning, app setup and handover. Metering, switchboard changes, longer cable routes and other site work are itemised where required.

The charger’s 6 m vehicle cable is separate from the electrical wiring to your switchboard.

AUD, including GST, charger and base installation. Extended cabling, switchboard changes, metering and other site work are quoted separately. Your vehicle, electrical supply and installation position determine the final configuration. No battery rebate or package discount is assumed. Your written quote confirms the equipment and complete installed price.