Sigenergy EV AC Charger

7 kW on single phase; 11 or 22 kW on three phase.

Your vehicle’s onboard AC charger and available electrical capacity limit the actual rate. The tethered version has a 5 m Type 2 cable, so we check the parking position and charge-port reach. It can sit away from your SigenStor; the DC module is a separate system option.

Standard AC charging and coordinated solar charging have different requirements.

Solar charging modes need the compatible SigenStor arrangement; dynamic load management also needs the Sigen Power Sensor. We check the controller, metering, communications and mySigen setup together. Adding this charger does not make an existing solar inverter battery-ready.

3 years of manufacturer cover for the Sigen EV AC Charger.

Sigenergy's AU/NZ warranty dated 26 May 2026 covers the EV AC charger for three years. Cover starts at installation, activation and registration, or 180 days after factory shipment if not commissioned earlier. Installation, firmware and environmental conditions apply. PSW’s separate installation and service warranty is 5 years. For equipment supplied and installed by PSW, from installation completion, only where your signed installation agreement includes this commitment. Your written quote confirms whether it does. Existing longer promises and Australian Consumer Law rights remain unchanged. Manufacturer warranties apply separately on their own terms. Keep the model, serial number and handover documents. PSW Life Support can help with monitoring and eligible warranty enquiries when we supplied and installed your charger.

Sigen EVAC 7 / 11 / 22 family. The supplied model, cable version and installation are confirmed in your quote; the manufacturer datasheet contains the full electrical and protection limits.

Charging type

AC charging · Type 2

Rated power / supply

7 kW single phase · 11 or 22 kW three phase

Output current range

7 / 22 kW: 6–32 A · 11 kW: 6–16 A

Standard vehicle cable

5 m (tethered version)

Dimensions (W × H × D)

234 × 384 × 126 mm

Enclosure / mounting

IP65 · wall-mounted · indoors or outdoors

Operating temperature

−30 to +55 °C

Monitoring

mySigen · LED indication

Communications

4G / WLAN / Fast Ethernet · RS485 / Modbus RTU · OCPP 1.6J

Residual-current detection

30 mA AC / 6 mA DC

Manufacturer product warranty

3 years · AU/NZ terms apply

The guide includes the charger and base installation. Your quote records mounting, circuit protection, the electrical cable route and allowance, commissioning, app pairing and handover.

The 5 m vehicle cable is separate from the wiring to your switchboard. Metering, switchboard changes, longer routes and other site work are itemised where required.

AUD, including GST, charger and base installation. Extended cabling, switchboard changes, metering and other site work are quoted separately. Your vehicle, electrical supply and installation position determine the final configuration. No battery rebate or package discount is assumed. Your written quote confirms the equipment and complete installed price.