The researched choice for solar, battery & EV charging – Western Australia

Huawei inverter WiFi reconnection assistant

Is your Huawei inverter no longer producing data? Let’s get that back for you with the PSW Energy Huawei Inverter WiFi Reconnect Guide. The great news is that this is often only ever a minor issue. Chances are, the solar energy system is still producing power, you simply can’t see this information being logged anymore through the FusionSolar app.

Important: this post is pending an update. If you cannot reconnect your Huawei Inverter and are a PSW Energy customer, please contact PSW Life Support in the meantime.

Contents

The following guide is applicable for all Huawei wifi-enabled solar inverters, including the SUN2000L, SUN2000-L1, SUN2000-M0 and SUN2000-M1.

Likely causes

Ask yourself the following questions;

  • Was there a blackout or a power outage recently?
  • Has the modem been switched off for any reason recently?
  • Have you recently changed to the NBN?
  • Has the modem been changed or upgraded? 
  • Has the solar system been switched off recently?
  • Has an electrician been working on the property? 

If you answered yes to any of the above, there is a high chance your Huawei inverter disconnected from your WiFi network. Your inverter is now trying to communicate through an IP address no longer available from your modem.

It’s important you know the steps to reconnect any WiFi based device as IP addresses will continue to change over the systems lifetime. Here is how to get your Huawei inverter WiFi reconnected. 

Note: If your inverter has disconnected from your WiFi network, this will not affect your solar energy system’s ability to produce energy. It will only prohibit communication to the Huawei FusionSolar cloud server, allowing you to view your solar production information.

Required before initiating the sequence
  • Physical access to your Huawei inverter.
  • A WiFi-enabled device such as a smartphone or tablet.
  • Patience, the average reconnection time is 10mins.

The easiest way to reconnect is by scanning the QR code at the bottom of the label to connect to the inverter’s wifi once you have opened the FusionSolar app. However, if this is not an option on your model, please follow these steps:

Step 1: Activate WiFi Access Point

Open the FusionSolar app on your smartphone or tablet device. 

Select the WiFi tab in the top left -hand corner, then the second option “TAP TO GO TO SYSTEM SETTINGS”

The WLAN INVERTER tab at the top. 

An image of your inverter will appear under the heading, click on the inverter. 

The IDENTITY AUTHENTICATION page will appear, select the INSTALLER tab from the account drop down menu and enter the password 00000a, then click VERIFY

Go to COMMUNICATION CONFIGURATION tab, then ROUTER CONNECTION SETTINGS and enable ‘Connect to a wireless router’ function.

Step 2: Connect device WiFi

Press the WLAN arrow and a list of available wifi networks will appear, select your own network from the list and then insert the password for your network.
Wi-Fi Settings

Step 3: Domain

Ensure that the DHCP option is enabled and that the domain name is au1.fusionsolar.huawei.com for SUN2000 single-phase inverters and SUN2000L-KTL inverters installed prior to December 2019 or to sg5.fusionsolar.huawei.com for all SUN2000-KTL-MO three-phase inverters and ALL inverter models installed by PSW from December 2019 onwards.

PLEASE NOTE THAT FROM MARCH 2020, the au1.fusionsolar.com domain will be migrated to the sg5.fusionsolar.huawei.com domain, which will be a seamless migration and you will not have to do anything, Huawei will keep you informed and we are always here for support.

Step 4: Connection status

Check the status of the internet connection on the top left side above Device Information.
Wi-Fi Status

Step 5: Monitor

Now open your NetEco or FusionSolar app or portal and your system will be back on display!
Take your Huawei to the next-level

The Huawei inverter monitoring platform is good, but why not experience next-level solar monitoring insight? 

Add the Huawei Smart Power Sensor to view your load profile within the Huawei FusionSolar app. View what is currently available in the basic FusionSolar portal, plus energy consumption, energy export, true cost savings analysis and more!

PSW Energy Technical Support provides this content for PSW Life Support customers. PSW Energy customers seeking further assistance can access personalised support should the Huawei inverter WiFi reconnect issues persist.

Like this article?

Popular Products

What's your cost? It's free to ask

Your quote for a hassle-free EV charger installation begins here.

Solar catalogues include battery and EV charger options. If uncertain about which solar catalogue to select, 6.6 kW is a great place to start.

Important: PSW Energy supplies turnkey (supplied & installed) products only, Perth & Bunbury region, Western Australia. 

Important: PSW Energy supplies turnkey products in Western Australia (Perth & Bunbury region).