Goodwe Inverter Wifi Reconnect Guide.

Is your Goodwe inverter no longer producing data? Let’s get that back for you with the PSW Energy Goodwe Inverter WiFi Reconnect guide. The great news is that this is often only ever a minor issue. Chances are the solar energy system is still producing power,  you simply can’t see this information being logged anymore through the Goodwe SEMS Portal.

Goodwe DNS Inverter SEMs Portal iPhone App

Likely causes.

Ask yourself the following questions;

  • Was there a blackout or a power outage recently?
  • Has the modem been switched off for any reason recently?
  • Have you recently changed to the NBN?
  • Has the modem been changed or upgraded? 
  • Has the solar system been switched off recently?
  • Has an electrician been working on the property? 

If you answered yes to any of the above, then there is a high chance your Goodwe inverter has disconnected from your WiFi network. In a nutshell, your inverter is now trying to communicate through an IP address which is no longer available from your modem.

It’s important you know the steps to reconnect any WiFi based device as IP addresses will continue to change over the systems lifetime. Here is how to get your Goodwe inverter WiFi reconnected. 

IMPORTANT: If your inverter has disconnected from your WiFi network, this will not affect your solar energy systems ability to produce energy. It will only prohibit  the communication to the Goodwe SEMS Portal cloud server which allows you the view your solar production information.

Goodwe inverter WiFi reconnect guide.

The following Goodwe inverter WiFi reconnect guide is applicable for all Goodwe WiFi enabled inverters which include the Goodwe D-NS, Smart DT and ET Hybrid models.

For ease of reference the Goodwe buttons will be referred to as 1, 2, 3, 4 from left to right.

Step 1.

To complete the reconnection of your inverter, you’ll need access to the inverter and a WiFi-enabled device such as your smartphone or tablet. 

Open your Goodwe SEMS Portal app and click on WIFI CONFIGURATION in the bottom right-hand corner. Make sure your Goodwe inverter is POWERED ON and click next.  Click on the “GO INTO WLAN SETTING INTERFACE” button, a pop up will appear with all the information you need to connect to your inverter network.

SEMS Goodwe Portal Solar Monitoring

Step 2.

Open up the WIFI SETTINGS on your device and find your solar inverter network “Solar-WiFi########” and enter the password “12345678”.

Once you’ve connected to the inverter network, reopen the Goodwe SEMS app. Click NEXT again and select “the desired wireless network for the inverter” (your home WiFi network) and click CONNECTION.

Enter in your home WiFi network password and click next. You’ve successfully configured your inverter and the power light or WiFi light will now be solid (no flashing).

Prefer video? Rest your eyeballs on this simple video of the Fronius Inverter Wifi Reconnect Guide.​

Be good to yourself.

View more limited time specials:https://pswenergy.com.au/specials/

Leave a Reply

Your email address will not be published. Required fields are marked *